Flyscreen Repair and Replacement in Dunedin – Insect Screens Remeshed & Reframed
Window and Glass Repair Dunedin repairs and replaces flyscreens across the city. Torn or sagging mesh, frames that have bent or lost their corners, screens that went missing years ago, and new screens made to fit joinery that never had them.
- Existing frames remeshed, or new frames made to measure
- Pet resistant and midge grade mesh available
- Sliding, hinged and magnetic options
Get your free quote
Four quick questions. Most quotes come back the same day.
Screens matter more here than they look like they should. The Healthy Homes ventilation standard means rental windows have to be openable and able to be fixed open, and a tenant will not leave a window open through summer if the room fills with insects. On the coast, frames and hardware also take a salt hammering, so the cheap kits do not last.
Remesh or replace
If the frame is straight and the corners are sound, remeshing is much cheaper than a new screen. The old mesh and spline come out, new mesh goes in and is rolled into the groove, and the frame goes back.
If the frame is bent, twisted or has broken corner stakes, a new frame made to measure is the better spend, because a bent frame will never seal against the joinery.
Mesh types
Standard fibreglass mesh is fine for most windows. Pet resistant mesh is a heavier weave that stands up to a cat pushing at it. Midge or sandfly grade has a much finer weave, which cuts airflow slightly but keeps out the small stuff.
On coastal homes we use aluminium or stainless frames and avoid the thin steel corner hardware that seizes in salt air.
Screens and the ventilation rule
A flyscreen does not reduce the openable area for the Healthy Homes ventilation calculation, because the window still opens. What it does is make the tenant actually use the window, which is the point of the standard in the first place.
Mesh, frames and what lasts
Choosing the mesh
Standard fibreglass mesh suits most windows. Pet resistant is a heavier weave that stands up to a cat pushing at it. Midge and sandfly grade has a much finer weave, which cuts airflow slightly but keeps the small things out.
On the coast we use aluminium or stainless frames and avoid the thin steel corner hardware in cheap kits, because it seizes in salt air within a couple of seasons.
Remesh or replace
If the frame is straight and the corners are sound, remeshing costs a fraction of a new screen. The old mesh and spline come out, new mesh is rolled into the groove and the frame goes back.
A bent or twisted frame will never seal against the joinery no matter how good the mesh is, so that one gets remade to measure.
The flyscreen repair process at Window and Glass Repair Dunedin in Dunedin
Supply and fit work is simple to describe and easy to get wrong at the measure, because nothing can be adjusted once the product is made.
Template at the measure
The opening is measured and anything that is not a plain rectangle is templated. Cut outs, apertures and irregular shapes are recorded then, because they cannot be added afterwards. In older Dunedin housing very little is truly square.
Agree the specification in writing
Product type, thickness, backing or mesh, edge finish and fixing method, all confirmed before anything is ordered so what arrives is what you expected.
Talk through the position
Where the product goes affects both cost and performance. Putting a pet door into a smaller fixed pane rather than a large slider panel means a smaller replacement pane and a lower price, and it is worth looking at every option in the room.
Specify for humidity where it applies
A mirror in a Dunedin bathroom needs a backing rated for moisture. Standard backing in a wet area with limited ventilation is the single most common reason we return to replace one within a few years.
Manufacture to order
Almost everything in this category is made to your measurements, so there is a real lead time. Window and Glass Repair Dunedin confirms the date rather than estimating it.
Fit, fix and adjust
Fitted square, fixed properly and adjusted so everything operates as it should. Window and Glass Repair Dunedin does not leave a product that functions but sits crooked.
Clean down and explain the care
Site cleared, product cleaned, and you get told how to look after it. Most of what shortens the life of these products is being cleaned with the wrong thing.
Getting the details right in Dunedin
Small jobs are where corners get cut, because nobody inspects them and the consequences take years to appear.
Humidity is the enemy of most of these products
Cold rooms, limited ventilation and long winters mean bathrooms and laundries here stay damp far longer than they would further north. Specification has to reflect that rather than defaulting to the cheapest option.
Old openings are rarely square
In Victorian and Edwardian housing the opening has moved with the building. Templating rather than measuring two dimensions is the difference between a clean fit and a visible gap down one side.
Screens make windows get opened
Where insects or a cat are the reason a window stays shut, a screen is the cheapest ventilation improvement available. In a damp house that matters more than it sounds.
Safety glazing still applies
A shower screen, a splashback beside a hob and a pet door in a slider panel are all positions with requirements. Window and Glass Repair Dunedin specifies to the standard rather than to what is quickest.
What flyscreen repair costs in Dunedin
Small supply and fit jobs are priced by the product and the measure, and the measure is where the cost is decided.
Made to order, always
Almost everything in this category is manufactured to your measurements, so the price follows the size and the specification rather than a catalogue. There is a real lead time and Window and Glass Repair Dunedin confirms the date rather than estimating it.
Where the position changes the price
Putting a pet door into a smaller fixed pane rather than a large slider panel means a much smaller replacement pane. Looking at every option in the room before choosing is often worth several hundred dollars.
Specification for wet areas
A mirror in a Dunedin bathroom needs a moisture rated backing, and a splashback beside a hob needs toughened glass. Standard product in a wet or hot position is the single most common reason we return within a few years.
Repair before replacement
A torn flyscreen in a sound frame is remeshed for a fraction of a new unit. The frame is the expensive part and it usually outlives several meshes, so Window and Glass Repair Dunedin quotes the remesh first.
Getting the specification right in Dunedin
Three decisions that are permanent once the product is made.
Edge finish and fixing method
A polished edge is clean and modern, a bevel reads traditional, and both are done at manufacture. Mechanical clips allow a mirror to be removed later, adhesive gives a cleaner look and is effectively permanent.
Mesh type on screens
Standard fibreglass for insects, heavier pet resistant mesh where a cat or dog pushes at it, and fine mesh where sandflies are a problem. Fine mesh lets less air through, which matters in a house you are ventilating to manage damp.
Safety glazing still applies
A shower screen, a splashback and a pet door cut into a slider panel are all positions with requirements under the standard. Window and Glass Repair Dunedin specifies to it rather than to whatever is quickest to source.
Screen faults and options in Dunedin
Screens are cheap to fix and are almost always thrown away instead.
Remesh rather than replace the frame
A torn or sagging screen in a sound frame is remeshed at a fraction of a new unit. The frame is the expensive part and it usually outlives several meshes.
Frames go out of square and corners fail
The plastic corner pieces become brittle with UV and the frame racks. New corners and a re tension usually returns it, and where the extrusion has bent it is a new frame.
Mesh types do different jobs
Standard fibreglass for insects. Heavier pet resistant mesh where a cat or dog pushes at it. Fine mesh for sandflies and midges, which lets less air through and is worth it where they are a problem.
Screens, ventilation and Healthy Homes in Dunedin
Screens are the reason a lot of people keep windows shut, which has knock on effects.
A screened window gets opened
Where insects or a cat are the reason a window stays closed, a screen is the cheapest possible ventilation improvement. On a damp house that matters more than it sounds.
Screens and openable area
A screen does not remove an opening from the Healthy Homes openable area calculation, but a screen that jams the sash does. We check the sash still fixes open.
Sliding and retractable options
Fixed screens suit awning and casement windows. Sliding screens suit sliders. Retractable screens suit doors and openings where the screen is in the way most of the year.
Flyscreen Repair at a glance
- Remesh
- Existing frame remeshed where it is straight and sound
- New frames
- Made to measure in aluminium, coloured to match joinery
- Mesh options
- Standard fibreglass, pet resistant, midge and sandfly grade
- Types
- Fixed, sliding, hinged and magnetic
- Coastal
- Aluminium or stainless frames and hardware
Flyscreen Repair in Dunedin: common questions
Can my old flyscreen be remeshed instead of replaced?
If the frame is straight and the corners are sound, yes, and it costs much less than a new screen.
Do you make screens for windows that never had them?
Yes, made to measure and colour matched to your joinery.
Will a flyscreen affect Healthy Homes compliance?
No. The window still opens and can be fixed open, so the openable area calculation is unchanged.
Recent Dunedin jobs
Got three quotes for retrofitting the front of the house. Only ones who measured every opening and explained why the south facing rooms needed different glass. Fourteen windows over three days and the difference in the mornings is obvious.
Landlord here. Had four flats assessed before the inspections. Two just needed sashes freed up and stays replaced rather than new joinery, which saved me a fortune. Straight answers and a written report I could hand over.
Slider had been jamming for years and we assumed it needed replacing. Turned out to be rollers and a bent track. Two hours, a fraction of the price we were braced for.
Fogged unit in the lounge, measured on the Tuesday and in by the following Monday. Fair price and they cleaned up after themselves.
Get a price for flyscreen repair in Dunedin
Free measure, fixed written quote, and a straight answer on whether it needs repairing or replacing.
Start your quote
Four questions and you are done.